HMC Series

Horizontal machining centers with two folded pallet changer

Highlights:

  • Choice of control: SIEMENS 840D, FANUC 31i, HEIDENHAIN TNC 640
  • Traverses X / Y / Z up to: 1,400 / 1,050 / 1,200 mm
  • Pallet size: 630 / 800 / 1,000 mm
  • 2 Pallets
  • Direct measuring in all axes
  • Tool magazine with up to 246 slots
  • Wide range of high performance milling spindles HSK-A63 / HSK-A100

Raise your productivity to a new level with the HMC series. The FEM-optimized design of our horizontal machining centers of the HMC series with a 2-fold pallet changer ensures highest precision and continuous accuracy. The wide distance between the linear guides as well as large ball screws ensure maximum stability. The horizontal design allows best chip fall when machining different geometries and materials. Parallel set-up for machining with our optional zero-point clamping system on the second pallet reduces your non-productive times to a minimum.

Technical Data

HMC 630

 

Working Area  
Travel range X / Y / Z 750 x 700 x 770 mm
Feed / Rapid traverse X / Y / Z 50 m/min
Acceleration X / Y / Z 5 m/s²
Max. Torque B-Axis 2,165 Nm
Control  
Control SIEMENS 840 D / FANUC 31i / HEIDENHAIN TNC 640
Palettchanger  
No. of pallets 2
Pallet change time 10 s
Pallet size 630 x 630 mm
Pallet load 800 kg
Distance from floor to pallet top surface 1,100 mm
Max. size of workpiece: Diameter x Height Ø 750 × 800 mm
Spindle CS-40-238-A (Standard)  
Power (S1 / S6) 40 / 48 kW
Torque (S1 / S6) 280 / 340 Nm
Tool interface HSK-A100
Nominal Speed 1,350 rpm
Max. Speed 15,000 rpm
Further spindle options see down below
Accuracy according to VDI / DGQ 3441  
Measuring system direct
Positioning accuracy X / Y / Z 0.008 mm
Positioning accuracy B-axis 6"
Repeatability X / Y / Z 0.005 mm
Repeatability B-axis 3"
Tool magazine  
No. of tools 56
Optional no. of tools 76 / 96 / 246
Max. tool diameter 125 mm / 250 mm (for empty neighbouring spaces)
Max. tool length 450 mm
Max. tool weight 25 kg
Max. load of magazine 850 kg
Tool change time 3 s

 

HMC 800

 

Working Area  
Travel range X / Y / Z 1,000 x 1,050 x 1,200 mm
Feed / Rapid traverse X / Y / Z 50 m/min
Acceleration X / Y / Z 5 m/s²
Max. Torque B-axis 2,165 Nm
Control  
Control SIEMENS 840 D / FANUC 31i / HEIDENHAIN TNC 640
Palettchanger  
No. of pallets 2
Pallet change time 20 sec
Pallet size 800 x 800 mm
Pallet load 2,500 kg
Distance from floor to pallet top surface 1,250 mm
Max. size of workpiece: Diameter x Height Ø 1,100 × 1,300 mm
Spindle CS-40-238-A (Standard)  
Power (S1 / S6) 40 / 48 kW
Torque (S1 / S6) 280 / 340 Nm
Tool interface HSK-A100
Nominal Speed 1,350 rpm
Max. Speed 15,000 rpm
Further spindle options see down below
Accuracy according to VDI / DGQ 3441  
Measuring system direct
Positioning accuracy X / Y / Z 0.008 mm
Positioning accuracy  B-axis 6"
Repeatability X / Y / Z 0.005 mm
Repeatability B-axis 3"
Tool magazine  
No. of tools 56
Optional no. of tools 76 / 96 / 246
Max. tool diameter 125 mm / 250 mm (for empty neighbouring spaces)
Max. tool length 650 mm
Max. tool weight 30 kg
Max. load of magazine 850 kg
Tool change time 3.5 s

 

HMC 1000

 

Working Area  
Travel range X / Y / Z 1,400 x 1,050 x 1,200 mm
Feed / Rapid traverse X / Y / Z 50 m/min
Acceleration X / Y / Z 5 m/s²
Max. Torque B-axis 2,165 Nm
Control  
Control SIEMENS 840 D / FANUC 31i / HEIDENHAIN TNC 640
Palettchanger  
No. of pallets 2
Pallet change time 20 s
Pallet size 1,000 x 1,000 mm
Pallet load 2,500 kg
Distance from floor to pallet top surface 1,250 mm
Max. size of workpiece: Diameter and Height Ø 1,400 × 1,300 mm
Spindle CS-40-238-A (Standard)  
Power (S1 / S6) 40 / 48 kW
Torque (S1 / S6) 280 / 340 Nm
Tool interface HSK-A100
Nominal Speed 1,350 rpm
Max. Speed 15,000 rpm
Further spindle options see down below
Accuracy according to VDI / DGQ 3441  
Measuring system direct
Positioning accuracy X / Y / Z 0.008 mm
Positioning accuracy B-axis 6"
Repeatability X / Y / Z 0.005 mm
Repeatability B-axis 3"
Tool Magazine  
No. of tools 56
Optional no. of tools 76 / 96 / 246
Max. tool diameter 125 mm / 250 mm (for empty neighbouring spaces)
Max. tool length 650 mm
Max. tool weight 30 kg
Max. load of magazine 850 kg
Tool change time 3.5 s

 

Milling wihtout compromises

with the HMC Standard equipment!

Our HMC series is already equipped in the standard version with everything you need for a direct start into 5-axis machining. Still there are a number of options available for your specific needs

 

Standard equipment HMC

  • SIEMENS 840 D or HEIDENHAIN TNC 640
  • Direct measuring system in all axes
  • CYTEC spindle with 15,000 rmp 40/48 kW, 280/340 Nm (S1/S6)
  • Tool cooling by internal coolant supply
  • Double sliding doors for best accessibility to the workpiece
  • 2-fold pallet changer 1.000 x 1.000 mm
  • Tool magazine with automatic tool changer and 56 places
  • Thermal compensation for best thermal stability
  • Fully enclosed
  • Signal lamp
  • Flushing gun and coolant tank
  • Chip conveyor

 

Options

  • 5-Axis simulataneous machining
  • Rotary table with torque motor
  • Remote diagnostics
  • Selection of different spindles suitable for your requirements
  • Vibration Analysis
  • Air through spindle centre
  • Cooling unit
  • Tool changer with 76, 96 and 246 tool places
  • Workpiece measuring probe
  • Workspace flushing
  • Oil and emulsion mist extraction

 

Spindle options

Our motor spindles impress with fast run-up times and highest quality. Innovative sensor technology permanently monitors the milling process and ensures trouble-free production. Optimum heat dissipation is guaranteed by the optimised machine design and the water cooling system integrated into the spindle. In addition to the standard main spindle, other spindle options are available for you.

CS-21-180-S

Power S1 21 kW
Power S6 27 kW
Torque S1 100 Nm
Torque S6 130 Nm
Lubrication Grease
Tool taper HSK-A63
Nominal speed 2,000 rpm
Max. speed 18,000 rpm

 

CS-28-180-A

Power S1 28 kW
Power S6 35 kW
Torque S1 90 Nm
Torque S6 113 Nm
Lubrication Grease/Oil/Air
Tool taper HSK-A63
Nominal speed 2,000 rpm
Max. speed 20,000 rpm

 

 

CS-27-180-S

Power S1 27 kW
Power S6 32 kW
Torque S1 130 Nm
Torque S6 170 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,000 rpm
Max. speed 12,000 rpm

 

 

CS-34-180-S

Power S1 34 kW
Power S6 43 kW
Torque S1 170 Nm
Torque S6 220 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,000 rpm
Max. speed 12,000 rpm

 

CS-40-180-S

Power S1 40 kW
Power S6 51 kW
Torque S1 67 Nm
Torque S6253 85 Nm
Lubrication Grease
Tool taper HSK-A63
Nominal speed 5,700 rpm
Max. speed 24,000 rpm

 

 

CS-42-180-S

Power S1 42 kW
Power S6 53 kW
Torque S1 201 Nm
Torque S6 263 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,000 rpm
Max. speed 12,000 rpm

 

CS-40-200-S

Power S1 40 kW
Power S6 50 kW
Torque S1 160 Nm
Torque S6 200 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,400 rpm
Max. speed 15,000 rpm

 

CS-50-200-S

Power S1 50 kW
Power S6 64 kW
Torque S1 240 Nm
Torque S6 300 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,000 rpm
Max. speed 8,000 rpm

 

 

CS-70-200-S

Power S1 70 kW
Power S6 90 kW
Torque S1 85 Nm
Torque S6 105 Nm
Lubrication Oil/Air
Tool taper HSK-A63
Nominal speed 8,000 rpm
Max. speed 24,000 rpm

 

 

CS-40-238-A

Power S1 40 kW
Power S6 48 kW
Torque S1 280 Nm
Torque S6 340 Nm
Lubrication Grease
Tool taper HSK-A63
Nominal speed 1,350 rpm
Max. speed 15,000 rpm

 

CS-50-238-A

Power S1 50 kW
Power S6 63 kW
Torque S1 248 Nm
Torque S6 315 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 2,000 rpm
Max. speed 15,000 rpm

 

CS-42-238-S

Power S1 42 kW
Power S6 55 kW
Torque S1 400 Nm
Torque S6 525 Nm
Lubrication Grease
Tool taper HSK-A100 / SK50 / C8
Nominal speed 1,000 rpm
Max. speed 8,000 rpm

 

 

CS-70-238-S

Power S1 70 kW
Power S6 90 kW
Torque S1 85 Nm
Torque S6 105 Nm
Lubrication Grease
Tool taper HSK-A63
Nominal speed 7,000 rpm
Max. speed 22,000 rpm

 

 

CS-73-260-A

Power S1 73 kW
Power S6 92 kW
Torque S1 398 Nm
Torque S6 508 Nm
Lubrication Grease
Tool taper HSK-A100
Nominal speed 1,750 rpm
Max. speed 5,000 rpm

 

CS-75-260-A

Power S1 75 kW
Power S6 94 kW
Torque S1 484 Nm
Torque S6 620 Nm
Lubrication Grease
Tool taper HSK-A100/SK 50
Nominal speed 1,600 rpm
Max. speed 10,000 rpm

 

CS-115-260-S

Power S1 115 kW
Power S6 138 kW
Torque S1 700 Nm
Torque S6 824 Nm
Lubrication Grease
Tool taper HSK-A100/SK50
Nominal speed 1,600 rpm
Max. speed 5,000 rpm

 

Download image brochure

DEPO_Broschure_Maschinenuebersicht_quer_web_EN_210629.pdf (8.7 MiB)

DOWNLOAD